Home » Products » Welding Manipulator, Column Boom Manipulator » Movable Welding Manipulator (Column Boom Manipulator)

Movable Welding Manipulator (Column Boom Manipulator)

1. The column and boom of the movable welding manipulator are manufactured with cold-formed welded type structure. After the annealing process and finish machining, they possess fine rigidity and strength.
2. To ensure safety, the boom lifting device uses a ratchet-and-pawl structure and is equipped with a fall protection device.
3. Frequency control is applied for the adjustment of retracing speed, greatly improving the reliability and stability of the welding manipulator operation.
4. The front end of the boom is manufactured with a cross adjustment structure which can be adjusted through the manual control box.

5. The eight guide wheels all utilize eccentric structure. During installation and set up, the lead rail tension can be adjusted by using the eccentric shaft. After this adjustment, the rail should be locked with double nuts.

6. The column rotation can be carried out with manual and electric control then locked.
7. The electrical equipment of the movable welding manipulator includes a manual control box and electric cabinet.
8. Trolley, manned seat and worktable, drag chain, seam tracing and monitoring system, and flux recovering system are optional.

The movable welding manipulator or column boom manipulator is used for the automatic welding of internal and external circular seams, and internal and external longitudinal seams of steam drums and other cylindrical pieces in the boiler, pressure container, oil, machinery manufacturing industries and in the chemical industry.


Type LHQ Light LH Medium LHM Heavy LHW Super-Heavy
Boom Lifting Stroke (mm) 1-3 2-4 2-8 2-13
Boom Retracting Stroke (mm) 1-3 1-4 2-8 4-12
Lifting Speed (mm/min) 800 800 800 800
Retracting Speed (mm/min) 120-1200 120-1200 120-1200 120-1200
Column Rotation Angle(°) ±180° ±180° ±180° ±180°
Speed (rpm) Manual 0.11 Manual 0.11 Manual 0.10 Manual
Trolley Travel Speed (mm/min) Manual 2000 2000 2000
Trolley Span (mm) 1060 1500 2000 2500

Column and boom: Edgefold welding structure with annealing process and finish machining
Lead rail: 45 steel

1. To ensure a safe connection, rotary welding manipulator should be grounded and reliably connected using the correct voltage. Should a problem arise, the power supply should be cut off immediately and the equipment inspected and repaired before operating the machine.
2. Wiring located outside the equipment should be inspected for faculty connection. If a problem arises with the cable insulation, the column boom manipulator should be immediately stopped and overhauled.
3. Welding should be performed in strict compliance with safety regulations and protective equipment must be worn while operating the rotary welding manipulator.
4. The joint of the multicore cable should be inspected. If loose, it may cause poor contact and affect welding operation. To avoid breakage, the welding cable should not be twisted too often.
5. Should a problem arise with the cable insulation, the machine must be immediately shut off and overhauled.
6. The rotary welding manipulator should be operated in an area free from rainwater, corrosive gas and high temperature to avoid causing damage to electronic components or affecting operation functionality.
7. A special power supply is required if frequent fluctuation of main voltage exists.

Packaging information
The following packaging is available
1. Palletizing plus plywood
2. Wooden case
3. Plastic film (nude packaging)

1. HENGTONG movable welding manipulator comes with a one year warranty in which time we will solve any quality problems that should arise free of charge.
2. Our specialized after sales service personnel call and/or email our clients. We value our customers' feedback which helps us improve our products.
3. We attend several international trade fairs each year and visit with clients in the city the trade show is located.
4. We reply to our customers within 24 hours (excluding holidays).

Hengtong is a Chinese manufacturer of movable welding manipulator, being ISO9001:2008 certified. In addition, we also manufacture welding rotator machine, welding positioner, column boom manipulator and chamfering machine. These products are mainly used in boilers, pressure containers, wind towers, and the chemical, petroleum and shipbuilding industries. If you have any related need, please feel free to contact us.

Feedback Form
Other Products
    1. Custom Made Welding Rotator, Turning RollCan be designed for movable type, lifting type, etc. with specially designed roller beds making welding more convenient.
      Client can select materials for roller production.
    1. Standard Turning Roll, Welding RotatorThe equipment should be cleared before using. Rubber rollers should be kept away from oils and heat to avoid aging. If possible, the equipment should assigned to one ...
    1. Anti Drift Turning Roll, Welding Rotator Composed of driving roller, idler, electric cabinet and manually controlled box.
      Distance between rollers can be adjusted to fit barrels with different diameters. Convenient to operate ...
    1. Custom Made Turning Roll, Welding RotatorClient can select materials for roller production. Materials include black rubber, polyurethane and steel.
      Can be designed into widened, heightened ...
Hengtong welding equipment company is a Chinese of welding equipment and cutting machine. Our company specializes in the production of welding rotator, pipe turning roll, welding positioner, welding manipulator, and other welding equipment, column boom manipulator and chamfering machine, which are mainly used in welding big boilers, pressure containers, wind towers, and the chemical project, petroleum and shipbuilding industries. We have an annual production capacity of 150 sets self adjustable welding rotator, 120 sets welding positioner, 90 sets conventional turning roll, and 80 welding manipulator.